The MATO MCP1 Belt Cleaning Unit is an aggressive head drum cleaner consisting of a multiple blade section, in line, mounted just under the Tangential centre line of the head pulley, to remove the bulk of the carry back material to return to the main flow of product being conveyed. The MCP1 cleaner is mounted underneath the head drum to ensure no material build up occurs on the cleaner unit, and to eliminate the risk of damage from the cleaner to the belt.

Each blade is individually mounted with a rubber tensioning cushion to ensure even blade pressure across the face of the head drum. Tungsten carbide blades are used for fully Vulcanised Belts and Polyurethane Blades are used for mechanically fastened belts.

Tungsten Carbide Blades: MATO offers different grades of Tungsten Carbide to suit each application. E.g. Tungsten Impact where used with aggressive products or belts, Tungsten long life for high speed, abrasive, applications (Not for use with mechanical fasteners.)

The MATO MCP3 Belt Cleaning Unit is an aggressive head drum cleaner consisting of a multiple blade section, in line, mounted just under the tangential centre line of the head pulley, to remove the bulk of the carry back material to return this to the main flow of product being conveyed.

The MCP3 cleaner is mounted underneath the head drum to ensure no material build up occurs on the cleaner unit. Each blade is individually mounted to ensure even blade pressure across the face of the head drum. The MCP3 cleaner is best suited on slower moving belts with or without mechanically fastened joints.

Polyurethane Blades:
The MCP3 Cleaner has a multiple of polyurethane grades available to choose from. They can be used in underground coal mines with stringent fire resistant, antistatic requirements, as well as surface applications with aggressive products being conveyed, to high temperature or even food grade applications.

The MCB1 Belt Cleaning unit with its rubber tensioning device is an economical, very adaptable belt cleaner. The mounting brackets on the MCB1 unit are designed to allow for variances in the installed location and optimum positioning on the head drum. Due to the design of the unit it can be rotated around the face of the head pulley to achieve optimum performance. The cleaner blades are easily changed out without the need of tools, and can be changed with no downtime.

Single Sided Polyurethane Blade:
The MATO MCB single-sided polyurethane blade is premoulded onto the cleaner shaft and is a throw away item. There are no set up requirements for the blade when assembled inside the guides. Different polyurethane grades are available depending on the application.